Floorboards awash |
It took the bilge pump about twenty minutes to empty the bilges, then I had to take up all the floor boards and rinse them off before putting them in the cockpit to dry. Luckily it was a sunny day with a breeze to speed up the drying process.
Drying out the bilges |
I had come to Holyhead with the intention of washing down the cabin, and painting the cabin ceiling. Clambering about the cabin with the floor boards up slowed the process down a bit, but it was essential to air the bilges as much as possible.
The wood in the rest of the cabin had suffered from the damp atmosphere too. We have been thinking about getting the deck redone to fix the leaks, and this winter has moved it up the list of essential repairs. The deck beam under the forward bulkhead has suffered.
Paint flaking off the cabin sides is a lot less traumatic though, and quite easy to tidy up once the wood beneath is dry. It does mean at least three days at the boat though, to get even a minimum set of coatings on.... There were no significant flaking areas on the ceiling though, so that job got done.
This year we have decided to try different anti-foul. We have been using Tiger Xtra, but the chandlers at Holyhead do not stock it, and told us this was because it does not work well under local conditions. We have gone for Teamac this time, and one of my jobs was to check it would go on over the Tiger without problems. I did a few test patches, and it seems fine, so next time I go it will be to get the anti-foul on.
Robinetta is booked to launch on 11th April, so I suspect I will get to know the road to Holyhead rather well over the next month.
No comments:
Post a Comment