Where the water comes in

Today was my first chance to get to West Mersea for a while due to work and weather, but it was a great day to go. Bright warm sun shine, and only a little breeze. The yard had moved Robinetta again, as the car park had been shrunk to only fit about ten cars, and she should not need to be moved again this winter. That meant I was able to get the electric hook up in place, so now I'll be able to brew up with the electric kettle.

The decks were damp with dew when I got there, but since I'd brought the heat gun and now had power I could burn the loose paint off the foredeck bulwark, which dried out the wood before I smoothed it down with the sander. I last painted this area before we left Shotley, and its not in bad condition overall, so I did not try to strip it totally. It's got a coat of grey metallic primer on all the bare bits now, and I'll probably leave it like that until the spring.

There is a distinct gap between the deck and the hull on the port side of the foredeck. The stopping has failed, and the caulking beneath is very loose. This may well be the source of one of our leaks this summer. 

As the wood of the hull dried out in the sun it was possible to see where a couple of areas stayed damp, as water trapped inside the hull leaked out. Paul had packed the one at the stern with bitumen when he recaulked it, but it looks as though it will need more attention this winter.

 

With the weather so perfect for it I sanded down where the mooring had abraded the antifouling down to bare wood and gave it a coat of underwater primer. The wood was in good condition and dry, so it made sense to get paint on it.

The old cooker had to go, so that went in the car to take to the dump, then I put the cover on the foredeck. There's rain forecast for tomorrow, and I want to keep it out of the boat as much as I can.